Blog

If you have a geyser installed and you are facing the issue of a water heater overflow pipe leaking, here is what to do and what are the possible reasons behind it.

If the geyser is leaking hot water for so long, it is a signal of danger, and urgent attention should be given to the geyser.

Top 5 reasons behind water heater overflow pipe leaking in a geyser:

 

• High Temperature

When the temperature is very high in a heater, it might be the reason behind the water heater overflow pipe leaking.

To avoid this risk, you should keep the temperature below 120 degrees Fahrenheit. Most geysers have the capacity to bear temperatures up to 140 degrees, but they should be kept below 120 to avoid any risk.

• Pressure Valve

The issue in the tank of the geyser that increases pressure beyond T&P valve threshold values can also be a possible reason for leaking.

If a steady leak occurs, the float valve needs to be changed immediately. You should switch the distribution board first and then turn off the water supply to the geyser.

Inbound water pressure in the water can also cause pressure in the geyser. Some heaters have pressure up to 100 PSI. It might cause huge damage to the heater if it stays at that level for a long period of time.

• T&P Valve

You need to set the T&P valve on standard settings as recommended. If the T&P valve is not set properly, it might be the reason for the overflow of the water heater pipe.

Inconsistent water pressure from outflows can also be the reason behind the water heater overflow pipe leaking.

• Thermal Expansion Tank

If the geyser has no thermal expansion tank, it will result in the overflow pipe leaking. It is very dangerous and can be the reason behind geyser overflow and bursting in some cases. 

Thermostats are made for controlling the temperature, and they should be available in the geyser. When the water is overflowing, you should switch off the geyser and run the hot water tap so that the heat can come out. 

• Fittings

Improper fittings in a geyser can also be a possible reason behind water heater overflow pipe leakage or dripping. You should make sure that the geyser is installed properly. 

At the time of installation, you should check the tightness of all the valves of the geysers. A geyser can make unusual noises during operation.

How to Stop Water Leakage From Pipe

You should know the basics about stopping water leakage from pipes. Here is how you can troubleshoot:

• Firstly, check the pressure of the relief valve in the tank. In case of extreme pressure, turn the water heater off. The valves should also need to be discarded in such cases.
• Check the water leakage around threads of the geyser and re-coat the thread if there is any with that. Keep a pipe wrench on the extension tube and unscrew it to fix it. You should also tight a firm in a very precise way, and you should also reattach the extension tube.
• Check the leak from overflow and the seal. Put the bucket at the outlet and flush the dirty water. It might have caused the leak, and you need to replace the seal in this case.

 

Choose urban Repairing For Best Services!

You should choose services from reliable sources from Urban Repairing for all your issues related to fixing the water geyser overflow pipe. We are the first and the best name in gas geyser repair in Mumbai,  gas geyser repair in Hyderabad, and gas geyser repair in Pune.

If you can not solve issues with the water leaking from the geyser on your own. You can get reliable services on time with our professional technicians.